Solve Your Problem With Help Of Radon Mitigation System Installers

We are working according to the Environmental Protection Agency (EPA). According to EPA, if the radon level is above 4pCi/L then it can cause serious health issues. We provide our best Radon Mitigation System Installers to help you.

Radon is a colorless, odorless and tasteless gas. It comes from the decay of radioactive elements such as uranium and radium. It is present in soil, rocks and atmosphere. It is very important to reduce the level of radon gas from your homes. As radon, gas is present in your homes, offices, schools and hospitals. It can cause many serious health issues such as lung cancer.

If you are facing this problem then contact us to solve your problems. We are here to serve you with our best services. We provide you complete guidance about the installation process. For this purpose, our team workers first visit your place and decide the appropriate point for the installation of a radon mitigation system. After that, the process begins within a few days.

The installation of a radon system consists of three basic steps. We are here to provide you complete guidance about all these steps.

Radon Mitigation System Installers

Drilling

Drilling is the first step in the installation of a radon mitigation system. Our installers decide an appropriate position to drill a hole in the ground that helps in the removal of radon. Drilling is done with the help of different mechanical devices. Drill bits are also used for this purpose. After drilling a hole in the ground, It is sealed with a glue material to protect radon gas leakage. If it is not glued properly then it can stars leakage after some time. After drilling, cleaning is also done to remove the small particles to protect the hole from blockage.

Piping assembly

Piping assembly is the second step in the installation of a radon system. An indoor assembly helps in the flow of radon gas. The piping assembly acts as a duct for the removal of radon gas. We provide surety for the piping assembly. PVC pipes are used that can face every climate condition. If you are facing any cracks in the piping assembly then you can contact us.

Fan installations

Fan installation is the last step. Fan helps to remove the trapped air from the ground. We also provide fan casing in case of damage. Fan also has flanges for screw tightening. The speed of the fan depends on the requirement of radon gas that is needed to be removed. After fan installation, outdoor piping is inserted vertically upward which helps in the removal of trapped gas.

Testing service

We also provide testing services. Short term and long-term tests are very helpful in the detection of the presence of radon gas. Many devices are helpful in this procedure to record the level of radon gas. Charcoal is also used because it absorbs the radon gas. Therefore, its presence can easily be detected. After testing, samples are sent to the lab for the record of radon gas in your homes.